Setting The Date And Time; Navigating The Interface; Changing The Language Used For Menus; Adjusting The Menu Appearance - Christie Mirage M Series User Manual

for each lamp. The lamp(s) must run for a minimum of 24 hours or the regeneration cycle is
skipped.
• Over-temp Fan Assist—When enabled, this option causes all fans to come on at full speed if
any enabled thermal sensor has an over-temperature fault. This may help to prevent an
emergency shutdown if the extra cooling can bring the temperature within limits before the
shutdown occurs. The fan assist causes increased noise levels due to the simultaneous full
speed operation of all the fans. Normal operation resumes when all over-temperature
conditions are removed or fan assist is turned off.

Setting the date and time

Configure the current year-month-day, hour-minute-second in Configuration > Date & Time.
Changes here reset the projector real-time clock.

Navigating the interface

Most of the projector controls are accessed from within the menu system. There are several groups
of related functions, with each group selectable from the Main menu.
On the remote keypad, enter the number that corresponds to the function menu you want to
access, such as 2 for the Image Settings menu. Or use the Up/Down Arrow Key on any keypad to
highlight the required option and press Enter. The corresponding function menu or list of further
options appears.
With a function menu displayed, enter a menu option number for any numbered option, or use the
Up/Down Arrow Key to highlight the required option and press Enter. Long menus have a scroll
bar on the right; use the arrow keys to access the remainder of the menu. Locked items or items
that do not pertain to the current action or condition appear dimmed and cannot be selected.
If no signal is present, all source-dependent adjustments are disabled. After 15 minutes of
inactivity, the projector leaves the menu system and returns to the presentation. When finished
with a function menu, do one of the following:
• Press Exit to return to the previous screen.
• Press Menu to leave the menu system and return to the presentation.
When navigating the web interface, Christie does not recommend using the web browser navigation
functionality (such as the Back and Forward functions) as this causes you to lose your web
connection. Christie recommends using the application interface and related functionality detailed
in this section to navigate.

Changing the language used for menus

Choose the available language to use in the projector menus. The change takes effect immediately.
1. In the Configuration menu, select the language from the list.

Adjusting the menu appearance

Change the appearance, content and/or location of on-screen menus and messages in
Configuration > Menu Preferences configure the following:
• Large Menu Font—Enter a check mark to enlarge menus and their text.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Operating the projector
61