Christie Mirage M Series User Manual page 62

• Menu Location—Use the list to choose a pre-defined default or customized location for the
display of all on-screen menus.
To create a custom menu location:
a. Choose a preset closest to the required location.
b. Adjust Horizontal Shift and Vertical Shift slide bars to move the menu to the required
location. Avoid locations too close to a corner or edge to prevent cropping of larger
menus.
• Display Automatic Message Boxes—Enable or disable the pop-up of automatic message
boxes. These messages to the user are not directly triggered by user actions. Examples are
signal information, function limitation, or auto calibration message boxes.
• Display User Message Boxes—Enable or disable the pop-up of message boxes that are
directly triggered by user actions, for example gamma or lens control message boxes.
• Display 3D Message Boxes—Enable or disable message boxes that are triggered by 3D
setup errors.
• Display Error Messages—Choose how to be notified of errors detected in either the incoming
signal or projector.
• Screen or All (default) to see brief on-screen messages. Christie recommends this
during setup or testing of the projector.
• Serial Ports to receive messages through RS232 or RS422 serial communication only.
To hide error message displays, such as during shows and presentations, select Off or Serial
Ports.
• Splash Screen Setup—Choose when to display a special introductory splash screen image,
such as your company logo, graphic or message.
• Always Off—A splash screen never appears
• Start-up Only—The splash screen logo appears at projector start-up only.
• Start-up And No Signal—A splash screen appears at start-up and at any time when
there is no signal.
To add your own splash screen in addition to the default Christie logo splash screen, use the
web interface to download the required bitmap (.bmp) file to the projector. This overwrites any
other user splash screen that has been downloaded. Only one user splash screen can be saved
in the projector.
• OSD Transparency—Select this box if you want the on-screen display menu backgrounds to
be transparent.
• Menu Type—Select the Basic or Advanced menu type.
• The Basic menu setting gives a small number of the most frequently used menu items.
• The Advanced menu setting gives the menu options.
• Splash Screen—Choose which splash screen is to be used; the default or user downloaded
splash screen.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Operating the projector
62