Christie Mirage M Series User Manual page 137

Channel Group Name
19 Setup Projector
Functions Orientation
20 Setup On Screen
Functions Display
21 Setup Lens Calibrate
Functions
22 Setup Lamp Power
Functions
23 Setup Lamp Mode
Functions
24 Setup Test Pattern
Functions
25 Colormetry Brightness
26 Colormetry Contrast
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Description
0 to 49 = Front projection
50 to 99 = Rear projection
100 to 149 = Front projection inverted
150 to 199 = Rear projection inverted
255 = Default
0 to 85 = On-screen display off
172 to 255 = On-screen display on
128 = Default
172 to 255 = Run calibration
0 = Default
Scaled as percentage of total control
range.
Examples are given for 350 W lamps:
0 = 0% 300 W
—
127 = 50% 335 W
—
255 = 100% 370 W (Default)
0 to 85 = Auto select single lamp
172 to 255 = Dual lamp mode
128 = Default
0 to 19 = Off
20 to 39 = Grid
40 to 59 = Grey Scale 16
60 to 79 = White
80 to 99 = Flat Grey
100 to 119 = Black
120 to 139 = Checker
140 to 159 = 13 Point
160 to 179 = Color Bars
180 to 199 = Aspect Ratio
200 to 219 = Edge Blend
220 to 239 = Boresight
0 = Default
0 to 255 = Scaled as percentage of total
control range, which is 0 to 100
128 = Default
0 to 255 = Scaled as percentage of total
control range, which is 0 to 100
128 = Default
Appendix: DMX/ArtNET
Notes
Does not change projector
orientation on default.
Does not change the on-
screen display on default.
Locked by channel
Lens shift enable
Depends on what lamps are
used, power rating may be
different scale.
Does not change lamp
mode on default.
137