Table of Contents
Advertisement
Lifting and positioning the projector
Safely lift and position the projector in the location where it will be used.
Warning! If not avoided, the following could result in death or serious injury.
•
A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
•
Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
This product must be installed in a landscape orientation, with all four feet supported on a level
surface. Do not install or operate the projector in an inverted position. If your site has any installation
requirements other than a typical theater projection booth, contact Christie for assistance.
Before lifting and positioning the projector, refer to the light intensity hazard distances.
1. Position each person at the corners of the projector.
2. Place both hands under the corner, grasping the projector frame.
Do not lift the projector using any feature on the projector cover, such as the cover louvers or
lens opening.
3. Lift up the projector and move it to the location where it will be used.
4. Position the projector so it is centered and parallel with the theater screen.
If space is limited, aim the projector slightly off-center and use lens offset to center the image
on the screen.
Connecting to an uninterruptable power supply
An uninterruptible power supply (UPS) allows the cinema projector head electronics to remain
operable during a power failure.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
The following table lists the part numbers for the optional UPS power cords for each region.
Description
250 V/10 A C13 2.5 m–Australia
250 V/10 A C13 3.0 m–China
250 V/10 A C13 2.5 m–Europe
250 V/10 A C13 2.5 m–Europe and Korea
125 V/12 A C13 2.5 m–Japan
9.83 125 V/15 A black–North America
250 V/10 A C13L–South Africa
250 V/10 A C13L 3.1 m black–United Kingdom
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Part Number
108-392105-XX
108-373104-XX
108-604101-XX
108-390103-XX
108-371102-XX
108-382104-XX
108-592107-XX
108-589103-XX
Installing and setting up
22
Advertisement
Table of Contents
