Installation Guidelines; Tools And Material - Allied Telesis AT-x550-18XTQ Installation Manual

Stackable 10gigabit intelligent access ethernet switches, alliedware plus v5.4.8-0.2
Hide thumbs Also See for AT-x550-18XTQ:
Table of Contents

Advertisement

Installation Guidelines

Tools and
Material
Here are the guidelines to installing the switch on a wall:
You may install the switch on a wall that has wooden studs or on a
concrete wall.
If you are installing the switch on a wall with wooden studs, use a
plywood base to support the switch. For more information, refer to
"Plywood Base for a Wall with Wooden Studs" on page 115. A
plywood base is not required for a concrete wall.
Do not install the switch on a wall that has metal studs. Metal studs
may not be strong enough to safely support the device.
Do not install the switch on sheetrock or similar material. Sheetrock
is not strong enough to safely support the device.
Warning
The device is heavy. Always ask for assistance before moving or
lifting it to avoid injuring yourself or damaging the equipment.
Warning
The device should be installed on a wall by a qualified building
contractor. Serious injury to yourself or others or damage to the
equipment may result if it is not properly fastened to the wall. 
E105
Here are the required tools and material for installing the switch on a wall:
For the AT-x550-18XTQ or AT-x550-18XSQ Switch, four AT-
BRKT-J24 wall brackets and sixteen screws (included with switch)
For the AT-x550-18XSPQm Switch, two wall/equipment rack
brackets and eight screws (included with the switch)
For the AT-x550-18XTQ or AT-x550-18XSQ Switch, four wall
anchors and screws (included with the switch)
For the AT-x550-18XSPQm Switch, two wall anchors and screws
(included with the switch)
Cross-head screwdriver (not provided)
Stud finder for a wooden wall, capable of identifying the middle of
wall studs and hot electrical wiring (not provided)
Drill and 1/4" carbide drill bit for a concrete wall (not provided)
Plywood base if you are installing the switch on a wall with wooden
studs (not provided.) Refer to "Plywood Base for a Wall with
x550 Series Installation Guide for Virtual Chassis Stacking
113

Advertisement

Table of Contents
loading

This manual is also suitable for:

X550 seriesAt-x550-18xsqAt-x550-18xspqm

Table of Contents