Chapter 7: Installing X330-20Gtx, X330-28Gtx, And X330-52Gtx Switches On A Wall; Installation Guidelines; Figure 50: X330-20Gtx And X330-28Gtx Switches On A Wall; Figure 51: X330-52Gtx Switch On A Wall - Allied Telesis x330-52GTX Installation Manual

Chapter 7: Installing x330-20GTX, x330-28GTX, and x330-52GTX Switches on a Wall

Installation Guidelines

100
The guidelines to installing x330-20GTX, x330-28GTX, and x330-52GTX
Switches on a wall are listed here:
The x330-20GTX and x330-28GTX Switches require the AT-

BRKT-J24 brackets kit for wall installations. The kit comes with
four identical brackets. Refer to Figure 32 on page 79. The kit is
sold separately.
The x330-52GTX Switch is installed on a wall with the two wall/

equipment rack brackets included with the unit. Refer to Figure 27
on page 74.
You can install the switches on walls with the front panels facing

up, left or right. Refer to Figure 50 and Figure 51.
Figure 50. x330-20GTX and x330-28GTX Switches on a Wall
Figure 51. x330-52GTX Switch on a Wall