Chapter 6: Installing X330-20Gtx And X330-28Gtx Switches On A Wall; Installation Guidelines; Figure 44: X330-20Gtx And X330-28Gtx Switches On A Wall; Figure 45: Unsupported Wall Installation - Allied Telesis x330 Series Installation Manual

Chapter 6: Installing x330-20GTX and x330-28GTX Switches on a Wall

Installation Guidelines

90
Wall installations of x330-20GTX and x330-28GTX Switches require the
AT-BRKT-J24 brackets kit. The contents of the AT-BRKT-J24 brackets kit
are shown in Figure 32 on page 75. The kit is sold separately. You can
install the switches with the front panels facing up, left or right. Refer to
Figure 44.
Figure 44. x330-20GTX and x330-28GTX Switches on a Wall
Do not install the switches with the front panels facing down. Refer to
Figure 45.
Figure 45. Unsupported Wall Installation
Here are the guidelines to installing switches on a wall:
You may install the switches on wooden or concrete walls.

If you are installing the switches on a wall with wooden studs, you

should install them on a plywood base. For more information, refer
to "Plywood Base for a Wall with Wooden Studs" on page 92.