Figure 64: User Exec Mode Prompt - Allied Telesis AT-x550-18XTQ Installation Manual

You are prompted for a user name and password.
5. If this is the initial management session of the switch, enter "manager"
as the user name and "friend" as the password. The user name and
password are case sensitive.
The local management session starts when the User Exec mode
prompt, shown in Figure 64. is displayed.
awplus>
Figure 64. User Exec Mode Prompt
The User Exec mode is the first level in the command mode interface.
For complete information on the modes and commands, refer to the
Software Reference for x550 Series Switches, AlliedWare Plus
Operating System.
6. Go to "Verifying the Stack" on page 134.
x550 Series Installation Guide for Virtual Chassis Stacking
133