Overview to Installing AT-x550-18XTQ and AT-x550-18XSQ Switches
in Equipment Racks
You can install AT-x550-18XTQ and AT-x550-18XTQ Switches in
19-inch equipment racks two ways. One way is with the AT-RKMT-J14
brackets that come with the switch. Refer to Figure 33.
Figure 33. AT-RKMT-J14 Brackets and Switch
For installation instructions, refer to "Installing the AT-x550-18XTQ or AT-
x550-18XSQ Switch in an Equipment Rack with the AT-RKMT-J14
Brackets" on page 95.
You can also install the switch in an equipment rack with the optional AT-
RKMT-J15 bracket. Refer to Figure 34.
Figure 34. AT-RKMT-J15 Bracket
x550 Series Installation Guide for Virtual Chassis Stacking
93