1/2.5/5/10Gbps Twisted Pair Ports On The At-X550-18Xspqm Switch; Cable Requirements; Table 5: Twisted Pair Ports 1 To 8 On The At-X550-18Xspqm Switch - Allied Telesis AT-x550-18XTQ Installation Manual

1/2.5/5/10Gbps Twisted Pair Ports on the AT-x550-18XSPQm Switch

Cable
Requirements
The specifications for twisted pair ports 1 to 8 on the AT-x550-18XSPQm
Switch are listed in Table 5.
Table 5. Twisted Pair Ports 1 to 8 on the AT-x550-18XSPQm Switch
Specification
Port Speed
Duplex Mode
Maximum Distance
Power over Ethernet
Power Budget
PoE Mode
Connector
Note
The network devices connected to the ports must be IEEE 802.3u-
compliant.
The cable requirements for the PoE+ twisted pair ports on the AT-x550-
18XSPQm Switch are listed in Table 6 on page 28 and Table 7 on
page 28.
x550 Series Installation Guide for Virtual Chassis Stacking
Description
1Gbps, 2.5Gbps, 5Gbps, or 10Gbps
You can set port speed with Auto-
Negotiation or manually. Guidelines are
given here:
- 1Gbps and 10Gbps can be set either
manually or with Auto-Negotiation.
- 2.5Gbps and 5Gbps must be set with
Auto-Negotiation.
The default port setting is Auto-
Negotiation.
Full-duplex only
100 meters (328 feet)
PoE (15.4 watts maximum) and PoE+ (30
watts maximum)
240W
Mode A
8-pin RJ-45
27