Table 9: Poe Leds For Ports 1 To 8 On The At-X550-18Xspqm Switch - Allied Telesis AT-x550-18XTQ Installation Manual

Table 9. PoE LEDs for Ports 1 to 8 on the AT-x550-18XSPQm Switch
State
Green
Solid Amber
Off
x550 Series Installation Guide for Virtual Chassis Stacking
Description
The switch is delivering power to a powered
device (PD) on the port.
The switch has shut down PoE on the port
because of a fault condition.
This LED state can result from the following
conditions:
- The port is not connected to a PD.
- The PD is powered off.
- The port is disabled in the management
software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs,
use the eco-friendly button.
31