Ricoh D143 Field Service Manual page 1152

3. SP Mode Tables
001 Access Permissible Number
002 Attack Detect Time
003 Productivity Fall Wait
004 Attack Max Num
[User Authentication]
5420
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
001 Copy
228
Sets a limit on access attempts when an excessive
number of attempts are detected for MFP
*CTL
features.
[0 to 500 / 100 / 1/step]
Sets the length of time for monitoring the
frequency of access to MFP features.
*CTL
[10 to 30 / 10 / 1 sec./step]
Sets the wait time to slow down the speed of
certification when an excessive number of access
*CTL
attempts have been detected.
[0 to 9 / 3 / 1 sec./step]
Sets a limit on the number of requests received for
certification in order to slow down the
certification speed when an excessive number of
*CTL
access attempts have been detected.
[50 to 200 / 200 / 1 attempt/step]
Determines whether certification is required
before a user can use the copy applications.
*CTL
[0 to 1 / 0 /1]
0: On, 1: Off