Ricoh D143 Field Service Manual page 1226

3. SP Mode Tables
-
Displays the value given by the following formula:
(Current running time / Target running time) × 100. This shows how much of the unit's
expected lifetime has been used up.
080
The Run Time (%) counter is based on the running time, not printouts nor revolutions. If the
number of printouts reaches the limit, the machine enters the end condition for that unit. If
the revolution count lifetime is reached first, the machine also enters the end condition,
even though the Run Time (%) counter is still less than 100%.
[0 to 255 / - / 1 %/step]
080 Run Time(%): Pump Unit: Bk
081 Run Time(%): Pump Unit: M
082 Run Time(%): Pump Unit: C
083 Run Time(%): Pump Unit: Y
091 -
Displays the value given by the following formula:
(Current printouts / Target printouts) × 100. This shows how much of the unit's expected
lifetime has been used up.
The Page (%) counter is based on printouts, not revolutions. If the number of printouts
reaches the limit, the machine enters the end condition for that unit. If the revolution count
lifetime is reached first, the machine also enters the end condition, even though the Page
(%) counter is still less than 100%.
[0 to 255 / - / 1 %/step]
091 Page (%): PCU: Bk
092 Page (%): PCU: M
093 Page (%): PCU: C
094 Page (%): PCU: Y
095 Page (%): Development Unit: Bk
096 Page (%): Development Unit:M
097 Page (%): Development Unit:C
098 Page (%): Development Unit:Y
302
*ENG
*ENG [0 to 255 / - / 1 %/step]
*ENG [0 to 255 / - / 1 %/step]