How To Read These Operating Instructions; Copyright, Limitation Of Liability And Revision Rights - Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual

How to Read these Operating...

1 How to Read these Operating Instructions

1.1.1 Copyright, Limitation of Liability and
Revision Rights
This publication contains information proprietary to
Danfoss. By accepting and using this manual the user
agrees that the information contained herein will be used
solely for operating equipment from Danfoss or equipment
from other vendors provided that such equipment is
intended for communication with Danfoss equipment over
a serial communication link. This publication is protected
under the Copyright laws of Denmark and most other
countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual will function properly in every physical, hardware
or software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior
notice or any obligation to notify former or present users
of such revisions or changes.
1.1.2 Available literature for VLT
Drive FC 200
- ®
VLT AQUA Drive Operating Instructions
MG20MXYY provide the neccessary information
for getting the drive up and running.
- ®
VLT AQUA Drive High Power Operating
Instructions MG20PXYY provide the neccessary
VLT AQUA Low Harmonic Drive Operating Instructions
X = Revision number
YY = Language code
Danfoss technical literature is also available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/Technical+Documentation.htm.
®
AQUA
®
MG20T202 - VLT is a registered Danfoss trademark
information for getting the HP drive up and
running.
®
-
VLT AQUA Drive Design Guide MG20NXYY
entails all technical information about the drive
and customer design and applications.
- ®
VLT AQUA Drive Programming Guide
MN20OXYY provides information on how to
programme and includes complete parameter
descriptions.
- ®
VLT AQUA Drive FC 200 Profibus MG33CXYY
- ®
VLT AQUA Drive FC 200 DeviceNet MG33DXYY
- Output Filters Design Guide MG90NXYY
- ®
VLT AQUA Drive FC 200 Cascade Controller
MI38CXYY
- Application Note MN20A102: Submersible Pump
Application
- Application Note MN20B102: Master/Follower
Operation Application
- Application Note MN20F102: Drive Closed Loop
and Sleep Mode
- Instruction MI38BXYY: Installation Instruction for
Mounting Brackets Enclosure type A5, B1, B2, C1
and C2 IP21, IP55 or IP66
- Instruction MI90LXYY: Analog I/O Option MCB109
- Instruction MI33HXYY: Panel through mount kit
- ®
VLT Active Filter Operating Instruction
MG90VXYY
1 1
5