How To Read These Operating Instructions - Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual

How to Read these Operating Instructions

How to Read these Operating Instructions
VLT ® AutomationDrive FC 300 is designed to provide high shaft performance on electrical motors. Please
read this manual carefully for proper use. Incorrect handling of the frequency converter may cause im-
proper operation of the frequency converter or related equipment, shorten lifetime or cause other
troubles.
These Operating Instructions will help you get started, install, program, and troubleshoot your VLT
tomationDrive FC 300.
The VLT ® AutomationDrive FC 300 comes in two shaft performance levels . The VLT
FC 300 comes in two shaft performance levels. FC 301 ranges from scalar (U/f) to VVC+ and handles
asynchronous motors only. FC 302 is a high performance frequency converter for asynchronous as well
as permanent motors and handles various kinds of motor control principles such as scalar (U/f), VVC+
and Flux vector motor control.
These Operating Instructions cover both FC 301 and FC 302. Where information covers both series, we
refer to FC 300. Otherwise, we refer specifically to either FC 301 or FC 302.
Chapter 1, How to Read these Operating In-
structions, introduces the manual and informs
you about the approvals, symbols, and abbrevia-
tions used in this literature.
Chapter 2, Safety Instructions and General
Warnings, entails instructions on how to handle
the FC 300 correctly.
Page divider for How to Read these Operating Instruc-
tions.
Page divider for Safety Instructions and General Warn-
ings.
MG.33.A8.02 - VLT is a registered Danfoss trademark
® Au-
® AutomationDrive
3