Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual page 88

How to Programme the Low Ha...
6.3.5 6-** Analog In/Out
Parameter group for configuration of the analog input and
output.
6-00 Live Zero Timeout Time
Range: Function:
10 s [1 - Enter the Live Zero Time-out time period. Live
*
99 s] Zero Time-out Time is active for analog inputs, i.e.
terminal 53 or terminal 54, used as reference or
feedback sources. If the reference signal value
associated with the selected current input falls
below 50% of the value set in 6-10 Terminal 53
Low Voltage, 6-12 Terminal 53 Low Current,
6-20 Terminal 54 Low Voltage or 6-22 Terminal 54
Low Current for a time period longer than the time
set in 6-00 Live Zero Timeout Time, the function
selected in 6-01 Live Zero Timeout Function will be
activated.
6-01 Live Zero Timeout Function
Option: Function:
Select the time-out function. The function set
in 6-01 Live Zero Timeout Function will be
activated if the input signal on terminal 53 or
54 is below 50% of the value in 6-10 Terminal
53 Low Voltage, 6-12 Terminal 53 Low Current,
6-20 Terminal 54 Low Voltage or 6-22 Terminal
54 Low Current for a time period defined in
6-00 Live Zero Timeout Time. If several time-outs
occur simultaneously, the frequency converter
prioritises the time-out functions as follows
1. 6-01 Live Zero Timeout Function
2. 8-04 Control Timeout Function
The output frequency of the frequency
converter can be:
•
[1] frozen at the present value
•
[2] overruled to stop
•
[3] overruled to jog speed
•
[4] overruled to max. speed
•
[5] overruled to stop with subsequent
trip
[0] Off
*
[1] Freeze
output
[2] Stop
[3] Jogging
[4] Max.
speed
[5] Stop and
trip
VLT AQUA Low Harmonic Drive Operating Instructions
6-10 Terminal 53 Low Voltage
Range:
0.07 V
6-11 Terminal 53 High Voltage
Range:
10.00 V
6-14 Terminal 53 Low Ref./Feedb. Value
Range:
0.000
6-15 Terminal 53 High Ref./Feedb. Value
Range:
Size related
®
MG20T202 - VLT is a registered Danfoss trademark
Ref./Feedback
[RPM]
Par 6-xx
1500
High Ref./
Feedb. Value'
1200
900
600
Par 6-xx
300
Low Ref./
150
Feedb. Value'
1 V
Par 6-xx
'Low Voltage'or
'Low Current'
Par 6-xx
'High Voltage'or
'High Current'
Function:
[ 0.00 - par. Enter the low voltage value. This analog
*
6-11 V] input scaling value should correspond
to the low reference/feedback value set
in 6-14 Terminal 53 Low Ref./Feedb. Value.
Function:
[ par. 6-10 - Enter the high voltage value. This
*
10.00 V] analog input scaling value should
correspond to the high reference/
feedback value set in 6-15 Terminal 53
High Ref./Feedb. Value.
Function:
[-999999.999 - Enter the analog input scaling
*
999999.999 ] value that corresponds to the low
voltage/low current set in
6-10 Terminal 53 Low Voltage and
6-12 Terminal 53 Low Current.
Function:
[-999999.999 - Enter the analog input scaling
*
999999.999 ] value that corresponds to the
high voltage/high current value
set in 6-11 Terminal 53 High
Voltage and 6-13 Terminal 53
High Current.
5 V 10 V
[V]
Analog input
6
87
6