A1.4.2 Status Menu; A4 Normal Menu; Status Menu - Edwards iXH100 Instruction Manual

By default the 4 parameters displayed in the Normal menu are as shown above for the iXH, these may be changed via
the Edit Display attributes menu, accessed from the SETUP menu. For the pXH, the default Normal menu is as shown
below.
Description
Serial Number
Control Holder
pXH booster current
Dry pump current
A1.4.2

Status menu

Press the Status button to enter. Scroll by pressing up/down keys. Press CANCEL to exit back to Normal menu.
If a device is not fitted the associated parameters will not be displayed. Parameters displayed:
Description
*
Serial Number
Control Holder
Dry Pump current
Booster current
pXH Booster current
Green Mode state
Gate valve open/closed state
Remote Gate valve open/closed state
Dry pump stator reference temperature
Dry Pump temperature
Dry Pump exhaust stage temperature
Dry Pump End Cover temperature
Dry Pump temperature 2
Booster Temperature
Booster MB End Cover temperature
pXH Booster Temperature
pXH End cover Temperature
N Flow Rate
2
Dry Pump Power
Booster Power
pXH Booster Power
Dry Pump speed in percent
Dry Pump speed in Hz
Booster speed in percent
Booster speed in Hz
pXH Booster speed in percent
© Edwards Limited 2012. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Table A4 - Normal menu
Typical Display
S/N 1234567
NONE IN CONTROL
PB CURRENT 1.1A
DP Current NP
Table A5 - Status menu
Typical Display
S/N 1234567
NONE IN CONTROL
DP CURRENT
MB CURRENT
PB CURRENT
GREEN MODE STATE
GATE VALVE
PB VALVE
TCS REF
DP TEMP
DP EXH STG
DP E/C TEMP
DP TEMP 2
MB TEMP
MB E/C TEMP
PB TEMP
PB E/C TEMP
N FLOW
2
DP POWER
MB POWER
PB POWER
DP SPEED
DP SPEED
MB SPEED
MB SPEED
PB SPEED
M561-00-880 Issue C
1.1A
1.1A
1.1A
Off
Open
Open
100C
100C
100C
100C
100C
100C
100C
100C
100C
44 slm
1.1 kW
1.1 kW
1.1 kW
100 %
100 Hz
100 %
100 Hz
100 %
Page 59