The Controls/Connectors On The Rear Of The Pump - Edwards iXH100 Instruction Manual

Dry pumping systems
Table of Contents

Advertisement

M561-00-880 Issue C
Item Control/connector identification
1
Ethernet LAN LED (green)
2
Ethernet link LED (yellow)
3
Ethernet connection
4
Power LED (green)
5
System interface
6
Warning LED (yellow)
7
Running and Alarm LEDs (2 colours,
either green or red)
8
Accessory interface
9
MicroTIM in control LED (green)
10
EMS interface
Page 4
Figure 4 - The controls/connectors on the rear of the pump
Edwards and the Edwards logo are trademarks of Edwards Limited.
Item Control/connector identification
11
Micro TIM connection (if fitted)
12
Electrical supply connection
13
Electrical connector locking
mechanism
14
Nitrogen purge connection
15
Cooling water supply connection
16
Protective earth (ground) stud
17
Exhaust gas outlet connection
18
Cooling water return connection
19
RF earth (ground) stud
© Edwards Limited 2012. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents