Edwards iXH100 Instruction Manual page 6

Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
iXH500H
iXH3050H
iXH3050HTX
iXH4550HT
iXH6050H
iXH6050HT
Where x = 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C or D depending on gas module type
Where y = 1 means 'no check valve' and y = 3 means 'check valve supplied'
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN1012-2:1996, A1: 2009
EN61010-1: 2010
EN 61326-1: 2006
EN50581:2012
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2nd Edition July 12, 2004, including revision July 22, 2005 – Safety
Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 1: General Requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does
not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
Mr Mark Hope, Global Technical Support Manager
This product has been manufactured under a quality system certified to ISO9001:2008
Low Volt Systems
(200-230V)
AC0E0xy23000
AC5E0xy23310
AC5E2xy23300
AC6E1xy23300
AC7E0xy23300
AC7E1xy23300
Compressors and Vacuum Pumps. Safety Requirements.
Part 2 - Vacuum Pumps.
Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. Part 1 - General Requirements.
Electrical equipment for measurement, control and laboratory
Use - EMC requirements. (Industrial Location Immunity
- Class A Emissions)
Technical Documentation for the Assessment of Electrical and Electronic Products
with respect to the Restriction of Hazardous Substances
High Volt Systems
(380-460V)
ACAE0xy23000
ACFE0xy23310
ACFE2xy23300
ACGE1xy23300
ACHE0xy23300
ACHE1xy23300
22.10.2013, Burgess Hill
Date and Place