Edwards iXH100 Instruction Manual page 7

Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
iXL250Q
iXL750Q
iXL750R
Where x = 2 means 'standard booster oilbox evacuation' and x=3 means 'external booster oilbox evacuation'
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN1012-2: 1997
EN61010-1: 2010
EN 61326-1: 2006
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements
when installed in accordance with the instruction manual supplied with the pump,
following the provisions of:
2006/95/EC
2004/108/EC
2006/42/EC
Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
Mr Mark Hope, Global Technical Support Manager
This product has been manufactured under a quality system certified to ISO9001:2008
Low Volt Systems High Volt Systems
(200-230V) (380-460V)
AS43001x2300 ASE3001x2300
AS46001x4300 ASE6001x4300
AS56001x4300 ASF6001x4300
Compressor and Vacuum Pumps Safety Requirements. Part 2 - Vacuum Pumps
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use. Part 1 – General Requirements.
Electrical equipment for measurement, control and laboratory use - EMC requirements
(Industrial Location Immunity – Class A Emissions)
nd
Low Voltage Directive
Electromagnetic Compatibility Directive
Machinery Safety Directive
Edition July 12, 2004, including revision July 22, 2005 -
22.10.2013, Burgess Hill
Date and Place