Ordering Accessories; Accessories - Edwards iXH100 Instruction Manual

M561-00-880 Issue C
7.3

Ordering accessories

Description
Seismic bracket kits (refer to
Retrofit kit to enable installation of iXH in place of iH1000:
For iXH1210 and iXH1210H
For iXH1220H
Exhaust extraction cover kit:
For NW40 exhaust
For NW50 exhaust
Exhaust Check Valve Kits:
NW40 (refer to Table 24)
NW50, PTFE Disc type (for iXL systems)
Nitrogen flow switches:
Suitable for 0 - 60 slm
Suitable for 0 - 204 slm
Utilities kit (contains mating half quick connectors for cooling water and
electrical connector mating parts):
Kit suitable for 380 - 460V systems using the Harting Han® 100A axial screw
module mains connector
Kit suitable for 200 - 230V systems using the Harting Han® 100A axial screw
module mains connector
Kit suitable for all systems using the Harting Han® K4/4 mains connector
Photohelic switch and gauge kit
Disconnect box (used with photohelic):
200 – 230 V 60 A max (suitable for systems with the Harting Han® K4/4 mains
connector)
200 – 230 V 100 A max (suitable for systems with the Harting Han® 100A axial
screw module mains connector)
pXH drip tray (used to fully satisfy SEMI S2 requirements)
Accessory modules:
Active Accessory Module (AAM)*
Passive Accessory Module (PAM)*
PDT
* AAM includes a PAM
If you wish to restrain your system using seismic brackets you will need to order the correct brackets for your
particular system, refer to
Page 54
Table 22 - Accessories
Table 23):
Table 23.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Item Number
A50767000 or A50768000
A50769000
A50770000
A50780000
A50791000
A50782000 or A50787000
A50790000
A50784000
A50785000
A50788000
A50789000
A50795000
A50803000
A50802000
A50804000
Contact Edwards
D37480500
D37480550
D37280700
© Edwards Limited 2012. All rights reserved.