Connect To Your Factory Extraction System (Optional); Connecting The Pump Inlet - Edwards iXH100 Instruction Manual

Flange diameter
ISO63
ISO100
ISO160
ISO200
ISO250
3.4

Connect to your factory extraction system (optional)

An extraction port is provided on iXH and iXL systems to allow secondary exhaust ventilation. When connected, the
airflow operates continuously and will extract substances of concern that may be released during a failure.
Refer to Section 2.8 for extraction rates required for each pump model and to
extraction cover kit.
Refer to Figure 3, item 7 for location of the extraction port. The pXH does not have facility for extraction.
© Edwards Limited 2012. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Figure 7 - Connecting the pump inlet
Use Edwards half claw clamps:
Half Claw Clamp
Part No.
C10007093
C10007093
C10011093
C10011093
C10011093
M561-00-880 Issue C
Tightening Torque
Qty Required
(Nm)
4
8
8
12
12
Section 7.3 for the required exhaust
5
5
5
5
5
Page 27