Edwards iXH100 Instruction Manual page 4

Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
iXH100
iXH200H
iXH610
iXH1210
iXH1210H
iXH1210HT
iXH1220H
iXH1220HT
iXH1220HTX
iXH1820
iXH1820H
iXH1820T
Where x = 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C or D depending on gas module type
Where y=1 means 'no check valve' and y=3 means 'check valve supplied'
to which this declaration relates is in conformity with the following standard(s) or other normative document(s):
EN1012-2: 1997
EN61010-1: 2010
EN 61326-1: 2006
EN50581:2012
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements
SEMI S2-0709 - Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment
when installed in accordance with the instruction manual supplied with the pump, following the provisions of:
2006/95/EC Low Voltage Directive.
2004/108/EC Electromagnetic Compatibility Directive.
2006/42/EC Machinery Safety Directive.
2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt%
for cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS
Directive does not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
Mr Mark Hope, Global Technical Support Manager
This product has been manufactured under a quality system certified to ISO9001:2008
Low Volt Systems
(200 - 230V)
AC010xy21000
AC0B0xy22000
AC110xy21100
AC310xy21200
AC3A0xy22200
AC3A1xy22200
AC3B0xy22200
AC3B1xy22200
AC3B2xy22200
AC420xy22200
AC4B0xy22200
AC421xy22200
Compressor and Vacuum Pumps Safety Requirements; Part 2 - Vacuum Pumps.
Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use; Part 1 – General Requirements.
Electrical equipment for measurement, control and laboratory use -
EMC requirements (Industrial Location Immunity – Class A Emissions)
Technical Documentation for the Assessment of Electrical and Electronic Products
with respect to the Restriction of Hazardous Substances
nd
Edition July 12, 2004, including revision July 22, 2005 -
22.10.2013, Burgess Hill
High Volt Systems
(380 - 460V)
ACA10xy21000
ACAB0xy22000
ACB10xy21100
ACD10xy21200
ACDA0xy22200
ACDA1xy22200
ACDB0xy22200
ACDB1xy22200
ACDB2xy22200
ACE20xy22200
ACEB0xy22200
ACE21xy22200
Date and Place