The Harting Han ® K 4/4 Cable-Mounted Connector - Edwards iXH100 Instruction Manual

M561-00-880 Issue C
Tighten the locking screw (item 3) to firmly hold the locking mechanism in place.

Connect the other end of your electrical supply cable to your electrical supply through a suitable isolator.

Low volt pin configuration
Pin identification
Pin 1
Pin 2
Pin 3
Pin 4
PE
Page 32
Figure 8 - The Harting Han
Phase 1
Phase 2
Phase 3
Not connected
Protective earth
Edwards and the Edwards logo are trademarks of Edwards Limited.
®
K 4/4 cable-mounted connector
High volt pin configuration
Torque settings for connector pins
2
Cable size (mm )
6
10
16
© Edwards Limited 2012. All rights reserved.
Max torque setting
(Nm)
2
3
4