Table of Contents
Advertisement
A.5.2 When using on-chip debug emulator QB-78K0MINI
QB-78K0MINI
On-chip debug emulator
Target connector specifications
A.6 Debugging Tools (Software)
Note
SM+ for 78K0
System simulator
ID78K0-QB
Integrated debugger
Note Under development
Remark ×××× in the part number differs depending on the host machine and OS used.
µ
S××××SM780000
µ
S××××ID78K0-QB
××××
AB17
BB17
504
APPENDIX A DEVELOPMENT TOOLS
The on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Kx1+. It supports the integrated debugger (ID78K0-
QB) supplied with the QB-78K0MINI. This emulator uses a connection cable and a USB
interface cable that is used to connect the host machine.
10-pin general-purpose connector (2.54 mm pitch)
SM+ for 78K0 is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of SM+ for 78K0 allows the execution of application logical testing and performance
testing on an independent basis from hardware development, thereby providing higher
development efficiency and software quality.
SM+ for 78K0 should be used in combination with the device file (DF780138) (sold
separately).
µ
Part number:
S××××SM780000
This debugger supports the in-circuit emulators for the 78K0/Kx1+ Series. The ID78K0-
QB is Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file (sold separately).
µ
Part number:
S××××ID78K0-QB
Host Machine
PC-9800 series,
IBM PC/AT compatibles
User's Manual U16899EJ2V0UD
OS
Windows (Japanese version)
Windows (English version)
Supply Medium
CD-ROM
Advertisement
Table of Contents
