Flash Memory Writing Tools; Debugging Tools (Hardware); When Using In-Circuit Emulator Qb-78K0Skx1 (Under Development) - NEC 78K0S/KB1+ User Manual

A.4 Flash Memory Writing Tools
Flashpro4 (FL-PR4, PG-FP4)
Flash memory programmer
PG-FPL2
Flash memory programmer
<R>
QB-MINI2
On-chip debug emulator with
programming function
<R>
FA-30MC-5A4-A,
FA-78F9234MC-5A4-MX
Flash memory writing adapter
Remark FL-PR4, FA-30MC-5A4-A and FA-78F9234MC-5A4-MX are products of Naito Densei Machida Mfg.
Co., Ltd.
For further information, contact: Naito Densei Machida Mfg. Co., Ltd. (TEL +81-42-750-4172)
A.5 Debugging Tools (Hardware)
<R>
A.5.1 When using in-circuit emulator QB-78K0SKX1 (under development)
QB-78K0SKX1
(under development)
In-circuit emulator
QB-50-EP-01T
(under development)
Emulation probe
QB-30MC-EA-01T
(under development)
Exchange adapter
QB-30MC-NQ-01T
(under development)
Target connector
Specifications of pin header on
target system
372
APPENDIX A DEVELOPMENT TOOLS
This is a flash memory programmer dedicated to microcontrollers incorporating a flash
memory.
This is a flash memory programmer dedicated to microcontrollers incorporating a flash
memory.
It is provided with the in-circuit emulator QB-78K0SKX1MINI.
This is a flash memory programmer dedicated to microcontrollers incorporating a flash
memory. It is available also as an on-chip debug emulator which serves to debug
hardware and software when developing application systems using all flash
microcontrollers (including the 78K0S/Kx1+).
This is a flash memory writing adapter which is used in connection with the flash
memory programmer.
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0S/Kx1+ Series. It supports the integrated debugger (ID78K0S-QB). It
is connected to the included AC adapter, target cable, and host machine via a USB interface
cable.
This is a flexible type emulation probe and is used to connect the in-circuit emulator and target
system.
This exchange adapter is used to perform pin conversion from the in-circuit emulator to target
connector.
This target connector is used to mount on the target system.
0.635 mm × 0.635 mm (height: 6 mm)
User's Manual U17446EJ3V1UD