To Connect The Analyzer To An Gpib Device - Agilent Technologies 35670A Service Manual

Preparing the Analyzer for Use Agilent 35670A

To connect the analyzer to an GPIB device

To connect the analyzer to an GPIB device
The analyzer is compatible with the Agilent Technologies Interface Bus (GPIB). The
GPIB is Agilent Technologies's implementation of IEEE Standard 488.1. Total
allowable transmission path length is 2 meters times the number of devices or 20
meters, whichever is less. Operating distances can be extended using an GPIB
Extender.
GPIB peripherals include HP-GL plotters, PCL printers, and SS-80 external disks.
Connect the analyzer's rear panel GPIB connector to an GPIB device using an
•
GPIB interface cable.
Caution The analyzer contains metric threaded GPIB cable mounting studs as opposed to
English threads. Use only metric threaded GPIB cable lockscrews to secure the cable
to the analyzer. Metric threaded fasteners are black, while English threaded fasteners
are silver.
For GPIB programming information, see the Agilent 35670A GPIB Programming
Reference.
2-12