Agilent Technologies 35670A Service Manual page 110

Verifying Specifications
Start Testing Menu Descriptions
Press [
START TESTING
following softkeys:
[
START BEGINNING
Prints the test record title page
information and starts the selected test
procedure at the beginning. When you
select [
START BEGINNING
is written to a file on the disk and
printed only after all tests are done.
[ ]
START MIDDLE
Displays a list of all the tests in the
selected procedure. Testing starts with
the test you select and continues through
the remainder of the tests in the list.
When you select [
START MIDDLE
the data is printed immediately after
each measurement.
[ ]
ONE TEST
Displays all the tests in the selected
procedure. The test you select is the
only test performed. When you select [
], the data is printed
ONE TEST
immediately after each measurement.
[ ]
RETURN
3-52
] to display the Returns to the ITM_35670A main
menu.
] Start a test to display the following
softkeys:
[
STOP TESTING
Stops the test and returns to the
], the data
ITM_35670A main menu.
[
RESTART TEST
Starts the current test over. Any
connection prompts are repeated.
[
RESTART MEAS
Starts the current measurement over.
],
The following softkeys also appear
when the program is waiting for you to
press [
[
STOP BEEPING
Turns off the beeper prompt for the
remainder of this measurement.
[
CONTINUE
Continues the test. Press this key after
following the directions on the display.
]
]
]
]:
CONTINUE
]
]
Agilent 35670A