To Adjust The Input Dc Offset - Agilent Technologies 35670A Service Manual

Adjusting the Analyzer Agilent 35670A

To adjust the input dc offset

To adjust the input dc offset
This procedure minimizes the residual dc response of the A1/A2 Input assemblies.
The standard two channel analyzer has one A1 Input assembly. The optional four
channel analyzer has two A2 Input assemblies: channel 1 and 3 are routed to the A2
Input assembly in the lower slot and channel 2 and 4 are routed to the A2 Input
assembly in the upper slot.
Equipment Required: None
5-10