Agilent Technologies 35670A Service Manual page 268

Adjusting the Analyzer
To adjust filter flatness
• Press the following keys:
[ ]
Rtn
[
CHANNEL 3 ADJUSTMNT
[
25 kHz FLATNESS
Wait for the analyzer to set up the adjustment. The analyzer is ready when
the adjustment message appears on the screen.
• While monitoring the
marker value of 0 0.1 dB.
• Press the following keys:
[ ]
Rtn
[
CHANNEL 4 ADJUSTMNT
[
25 kHz FLATNESS
Wait for the analyzer to set up the adjustment. The analyzer is ready when
the adjustment message appears on the screen.
• While monitoring the
marker value of 0 0.1 dB.
5-20
]
]
value, adjust A2 R615 in the lower slot for a
Yr:
]
]
value, adjust A2 R615 in the upper slot for a
Yr:
Agilent 35670A