Set Up The Logic Analyzer; Connect The Logic Analyzer - Agilent Technologies 1664A Service Manual

Set up the logic analyzer

Press the Config key. Assign all pod fields to Machine 1. To assign the pod fields,
1
select the pod fields, then select Machine 1 in the pop-up menu.
In the Analyzer 1 box, select the Type field. Select Timing in the pop-up menu.
2

Connect the logic analyzer

Using the 17-by-2 test connector, BNC cable, and probe tip assembly, connect the
1
data and clock channels of pod 1 to one side of the BNC Tee.
Using a BNC-banana cable, connect the voltmeter to the other side of the BNC Tee.
2
Connect the BNC Tee to the Main Signal output of the function generator.
3
Testing Performance
To test the threshold accuracy
3–9