To Change The Fuses - Agilent Technologies 35670A Service Manual

Preparing the Analyzer for Use

To change the fuses

To change the fuses
Both fuses are installed at the factory.
• Unplug the power cord from the analyzer.
• Press in and turn the appropriate fuse holder cap counter-clockwise (use a
small screw driver for the ac fuse). Remove when the fuse cap is free from the
housing.
• Pull the fuse from the fuse holder cap.
• To reinstall, select the proper fuse and place in the fuse holder cap.
DC Fuse
HP 2110-0920 30 A 32 V Normal Blow
• Place the fuse holder cap in the housing. Press in and turn clockwise.
2-10
AC Fuse
HP 2110-0342 8 A 250 V Normal Blow
Agilent 35670A