To Remove Dc-Dc Converter - Agilent Technologies 35670A Service Manual

Replacing Assemblies

To remove dc-dc converter

To remove dc-dc converter
1
Remove front panel (see ''To remove front
panel''). Remove A7 CPU assembly (see ''To
remove CPU'').
3
Using a T-10 torx driver, remove the four
screws from the shield. Unplug ribbon cables.
6-18
2
Using a T-10 torx driver, remove the five
screws from the front wall.
4
Using a T-10 torx driver, remove the four
screws from the A102 DC-DC Converter assembly.
Agilent 35670A