Agilent Technologies 35670A Service Manual page 109

Agilent 35670A
ITM_35670A Main Menu Descriptions
If you do not have a keyboard connected
to the analyzer, use the numeric key pad
and the alpha keys to enter names or
numbers. See the analyzer's help text
for a description of the alpha keys.
Load and run the ITM_35670A program
to display the following softkeys:
[ ]
START TESTING
Displays a menu that allows you to start
testing with any test or to select just one
test in the list. Before pressing this
softkey, use [
TEST CONFIG
[
EQUIP CONFIG ].
[ ]
TEST CONFIG
Displays the test configuration and a
menu that allows you to enter the
procedure, stop conditions, beeper
prompt, and GPIB address for the
analyzer and printer.
[
EQUIP CONFIG
Displays the test equipment
configuration and a menu that allows
you to enter the model number,
calibration due date, serial number, and
GPIB address for each test instrument.
] and [
TITLE PAGE
Displays the test record title page
information and a menu that allows you
to enter information for the analyzer.
[
STOP ITM
Stops the ITM_35670A program.
Verifying Specifications
]
]
]
3-51