To Troubleshoot Din Connector Failures - Agilent Technologies 35670A Service Manual

Agilent 35670A Troubleshooting the Analyzer

To troubleshoot DIN connector failures

To troubleshoot DIN connector failures
Use this test to determine if the fuse for the DIN connector is failing before replacing
the A10 Rear Panel assembly.
• Set the power switch to on ( ).
l
• Check the voltage on pin 2 of the DIN connector for +5V.
• If the voltage is correct, the A10 Rear Panel assembly is probably faulty.
• If the voltage is incorrect, replace A10 F200.
4-61