Setting Of Ncu Parameters - Canon MF8580Cdw Service Manual

Numeric parameter setting mode
No. Parameter
53 Set DTMF calling counts when receiving FAX
remotely
54 Set Busy Tone outgoing duration when using handset
55 - 80 Not in use
8
Service Mode > FAX > Setting of NCU Parameters > TONE/PULSE
M82 M85
Allowable setting range
10 to 9999 (default 25)
○ ○
○ ○
- -
T-8-31
8 Service Mode > FAX > Setting of NCU Parameters > TONE/PULSE

Setting of NCU Parameters

■ TONE/PULSE
Operation Method
1) Setting of Tone Parameters
While "#NCU" is displayed, press "OK" key -> Select "#TONE" and press "OK" key so that
it becomes tone parameter setting mode.
2) Setting of Pulse Parameters
While "#NCU" is displayed, press "OK" key -> Select "#PULSE" and press "OK" key so that
it becomes pulse parameter setting mode.
Item Function
TONE 01; Tone signal sending time
(PSTN)
02; Minimum pause time (PSTN) 10 to 9999 (msec)
PULSE PULSE FORM Pulse digit format
PULSE NUM 01; -
02; -
03; Pulse dial make ratio
04; Minimum pause time
8-39
Setting range M82 M85
10 to 9999 (msec)
○ ○
○ ○
0 -> DP (N)
1 -> DP (N+1) ○ ○
2 -> DP (10-N)
- - -
- - -
10 to 90 (%) ○ ○
10 to 9999 (msec) ○ ○
T-8-32
8-39