4
Disassembly/Assembly > Pickup Feeder System > Removing the Cassette Pickup Roller > Procedure
Removing the Cassette Pickup Roller
■ Procedure
CAUTION:
Be sure not to touch the surface of the Cassette Pickup Roller [1] and the Cassette
Separation Roller [2].
1) Turn ON the power switch.
2) Execute the following items in Service mode.
COPIER > FUNCTION > VIFFNC > FD-R-CHG
3) The Pickup Roller rotates and stops at the replacement position.
4) Disconnect the Inlet Connector.
5) Remove the cassette.
CAUTION:
Before tilting a host machine, remove toner cartridges (Y, M, C, Bk).
4
Disassembly/Assembly > Pickup Feeder System > Removing the Cassette Pickup Roller > Procedure
6) Place a host machine [1] as the Left Cover faces to the bottom.
[1]
[2]
F-4-247
CAUTION:
When laying down the main body, be sure to secure the ADF Unit with tape to prevent
from opening. In case that the ADF Unit is not secured with tape, when returning the
main body to its original position, the ADF Unit is closed swiftly, so this might cause
damage on the main body or injuries by catching the fingers.
4-114
[1]
F-4-248
4-114