Download Print this page

Canon MF8580Cdw Service Manual page 373

Mf8500/mf8200 series
Hide thumbs
Also See for MF8580Cdw 
Manual - 750 pages
User manual - 750 pages
Getting started - 292 pages

Advertisement

COPIER > FUNCTION > SPLMAN
SPL65677
Increase of paper leading edge margin
Details
To increase the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased
by 0.1 mm.
If the setting is incompatible with SPL68676 (decrease
of margin), the setting is disabled (the margin will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL68676
SPL68676
Decrease of paper leading edge margin
Details
To decrease the margin on the leading edge of paper.
As the value is incremented by 1, the margin is decreased
by 0.1 mm.
If the setting is incompatible with SPL65677(increase
of margin), the setting is disabled (the margin will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL65677
SPL68677
Increase of paper right and left margins
Details
To increase the margins on the right and left edges of
paper.
As the value is incremented by 1, the margin is increased
by 0.1 mm.
If the setting is incompatible with SPL25607 (decrease
of margins), the setting is disabled (the margins will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL25607
8
Service Mode > COPIER > FUNCTION > SPLMAN
M82 M85
8
Service Mode > COPIER > FUNCTION > SPLMAN
COPIER > FUNCTION > SPLMAN
SPL25607
Decrease of paper right and left margins
Details
To decrease the margins on the right and left edges of
paper.
As the value is incremented by 1, the margin is decreased
by 0.1 mm.
If the setting is incompatible with SPL68677 (increase
of margins), the setting is disabled (the margins will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL68677
SPL93822
Setting of department ID count all clear
Details
To set whether to disable clearing of all department ID
counts.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Be sure to perform this mode after consulting with the
system administrator at user's site.
Display/adj/set range
0 to 1
0: Enabled, 1: Disabled
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL78788
SPL78788
Setting of department ID count clear
Details
To set whether to disable clearing of department ID count.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Be sure to perform this mode after consulting with the
system administrator at user's site.
Display/adj/set range
0 to 1
0: Enabled, 1: Disabled
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL93822
SPL41250
Reset of calibration
Details
When the user allows printing at absence of toner,
calibration using toner is disabled.
As a remedy, calibration reset is executed by this switch.
Use case
When the user allows printing after absence of toner is
displayed.
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
8-25
M82 M85
8-25

Advertisement

loading

  Also See for Canon MF8580Cdw

  Related Manuals for Canon MF8580Cdw