Download Print this page

Canon MF8580Cdw Service Manual page 66

Mf8500/mf8200 series
Hide thumbs
Also See for MF8580Cdw 
Manual - 750 pages
User manual - 750 pages
Getting started - 292 pages

Advertisement

2
Technical Overview > Pickup / Feed System > Controls > Jam detection
● Delay jams
Pickup delay jam 1
This occurs when the leading edge of the paper is not detected by the registration sensor
from the start of image formation to re-pickup.
*
: MF8500: SR4, MF8200: SR602
Pickup delay jam 2 (MF8500 Series only)
This occurs when the leading edge of the paper is not detected by the MP tray pre-
registration sensor (SR7) within the pre-defined duration after the paper is fed from the multi-
purpose tray.
Fixing / delivery delay jam
This occurs when the leading edge of the paper is not detected by the fixing delivery sensor
within the pre-defined duration after re-pickup; or when the leading edge of the paper is not
*2
detected by the delivery full sensor
during the pre-defined duration after the trailing edge of
the paper is detected by the registration sensor.
*1
: MF8500: SR8, MF8200: SR609
*2
: MF8500: SR15
● Stationary jams
Pickup stationary jam
This occurs when the trailing edge of the paper is not detected by the registration sensor
within the pre-defined duration after re-pickup.
*
: MF8500: SR4, MF8200: SR602
Fixing / delivery stationary jam
This occurs when the trailing edge of the paper is not detected by the fixing delivery
sensor
*2
within the pre-defined duration after the trailing edge of the paper is detected by the
*1
registration sensor
.
*1
: MF8500: SR4, MF8200: SR602
*2
: MF8500: SR8, MF8200: SR609
2
Technical Overview > Pickup / Feed System > Controls > Jam detection
● Other jams
Fixing seizure jam
*
This occurs when the fixing / delivery sensor (SR8) detected the leading edge of the paper
but the sensor went off before starting the fixing / delivery stationary detection.
*
: MF8500: SR8, MF8200: SR609
Internal paper remaining jam
When the sensor below detects "Paper Sensor" before-and-after Power on, Door close, Print
operation.
< MF8500 Series >
• Paper feeder pre-registration sensor (SR1)
• Registration sensor (SR4)
*1
• MP tray pre-registration sensor (SR7)
• Fixing delivery sensor (SR8)
• Fixing arch sensor (SR10)
• Pre-registration sensor (SR12)
< MF8200 Series >
• Registration sensor (SR602
• Fixing arch sensor (SR603)
• Manual feed pre-registration sensor (SR605)
• Fixing delivery sensor (SR609)
*
Duplex re-pickup jam (MF8500 Series only)
This occurs when the leading edge of the paper is not detected by the registration sensor (SR4)
within the pre-defined duration elapsed from starting reversing.
Open door jam
This occurs when any of sensors detected paper in the device and the door opening is
detected during print jobs.
2-37
2-37

Advertisement

loading

  Also See for Canon MF8580Cdw

  Related Manuals for Canon MF8580Cdw