Removing The Multi-Purpose Tray Unit - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Pickup Feeder System > Removing the Multi-purpose Tray Unit > Procedure

Removing the Multi-purpose Tray Unit

■ Preparation
1) Remove the Toner Cartridges (Bk, C, M and Y).
CAUTION:
When installing/removing the Toner Cartridge, be careful not to damage the
Photosensitive Drum because it is exposed. Also, be sure to block light.
2) Remove the cassette.
■ Procedure
1) Place the host machine with the Left Cover [1] down.
CAUTION:
When laying down the main body, be sure to secure the ADF Unit with tape to prevent
from opening.
In case that the ADF Unit is not secured with tape, when returning the main body to its
original position, the ADF Unit is closed swiftly, so this might cause damage on the main
body or injuries by catching the fingers.
[1]
4 Disassembly/Assembly > Pickup Feeder System > Removing the Multi-purpose Tray Unit > Procedure
2) Open the Multi-purpose Tray Pickup Cover.
3) Move the 2 Multi-purpose Tray Paper Width Guide Plates [1] to the center as shown in the
figure below.
F-4-541
[1]
F-4-542
4-237
4-237