Canon MF8580Cdw Service Manual page 334

Item Name
25607 Decrease of paper right and left margins
Details To decrease the margins on the right and left edges of
paper.
As the value is incremented by 1, the margin is decreased
by 0.1 mm.
If the setting is incompatible with 68677 (increase of
margins), the setting is disabled (the margins will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit 0.1 mm
Default value 0
93822 Setting of department ID count all clear
Details To set whether to disable clearing of all department ID
counts.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to perform this mode after consulting with the
system administrator at user's site.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
78788 Setting of department ID count clear
Details To set whether to disable clearing of department ID count.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to perform this mode after consulting with the
system administrator at user's site.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
41250 Reset of calibration
Details When the user allows printing at absence of toner,
calibration using toner is disabled.
As a remedy, calibration reset is executed by this switch.
Use case When the user allows printing after absence of toner is
displayed.
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
6
Trouble Shooting > Special Management Mode > Menu List
Description M82 M85
○
○
○
○
6 Trouble Shooting > Special Management Mode > Menu List
Item Name
15176
Details
Use case
○
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range
Default value
89821
Details
Use case
Adj/set/operate method 1) Enter the setting value, and then press OK key.
○
Display/adj/set range
Default value
Supplement/memo
58122
Details
○
Use case
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
Default value
71100
Details
○
Use case
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
Default value
Supplement/memo
Description
Extension of detection on absence of toner
Error occurs when the drum running distance reaches a
certain point in the case of toner absence.
Turning this switch ON delays the occurrence of error
(threshold value is changed).
When delaying the display of "absence of toner" message
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Shop demonstration mode
To display image data on color UI repeatedly to appeal
the product features to potential users.
When appealing the product features to users at shops
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
When the setting value is 1 at startup, the shop
demonstration mode is enabled.
Wrinkle prevention mode
To prevent envelope from getting wrinkles by keeping
the speed of the Fixing Motor constant and feeding an
envelope with a little pulling tension applied to it.
When preventing envelope from getting wrinkles
0 to 1
0: OFF, 1: ON
0
Setting of the duty of Off-hook PCB
This is the mode to make handsets of particular
manufacturers to be rung when fax reception mode is set
to "FAX/TEL switching".
When fax reception mode is set to FAX/TEL switching
1 to 99
50
When receiving a call, a handset connected to the host
machine is rung. However, if the connected handset is
manufactured by a particular manufacturer (e.g., SANYO,
Model No.: TEL-DH5, etc.), it may not be rung. To solve
the problem, set the value so that the handset can be
rung correctly.
6-9
M82 M85
○ -
○ ○
○ -
▲ ▲
6-9