Removing The Adf Pickup Motor - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Pickup Motor > Procedure

Removing the ADF Pickup Motor

■ Preparation
1) Remove the ADF Pickup Feed Unit. Refer to page 4-43
■ Procedure
NOTE:
When removing the ADF Pickup Motor, it is not necessary to remove the ADF Upper
Cover Unit described in the previous step.
1) Remove the ADF Motor [1] in the direction of the arrow.
• 2 screws [2]
• 1 belt [3]
[2]
x2
[1]
[2]
4 Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Pickup Motor > Procedure
[3]
F-4-89
CAUTION:
• When installing the ADF Pickup Motor, be sure to hook the gear [1] of the motor on
the belt [2].
[1]
• When installing the ADF Pickup Motor, be sure to install with the connector [1] on the
right side.
[1]
4-46
[2]
F-4-90
[1]
F-4-91
4-46