Upgrading Via Internet - Canon MF8580Cdw Service Manual

6) Click [Yes] button for the warning message to start download.
7) Click [OK] button when download is completed.
8) Turn off and on the power to restart the device.
9) Output the spec report from Service mode to confirm if the firmware version is the same as
that on the note taken in Step 2).
COPIER> FUNCTION> MISC-P> SPEC
6
Trouble Shooting > Version Upgrade > Upgrading via Internet
F-6-13
F-6-14
6 Trouble Shooting > Version Upgrade > Upgrading via Internet

Upgrading via Internet

■ Overview
The firmware of the host machine can be upgraded via Internet without using PC by selecting
"Via Internet" in LUI.
Menu > System Management Settings > Update Firmware > Via Internet
MEMO :
• Refer to the User's Manual of the device for how to connect the device to the external
network.
• This is applicable either in a wired LAN environment or a wireless LAN environment.
■ Preparation
1) Check that there are no other jobs being executed.
2) In an environment where access is obtained via a proxy server, the proxy setting is made
from the remote UI.
3) Check that the serial number of the host machine is shown on the Main Controller PCB.
MEMO :
To upgrade the firmware of the host machine via Internet, the serial number of the
machine need to be written on the Main Controller PCB.
Execute COPIER > FUNCTION > MISC-P> SPEC, and check that the BODY No. is
registered.
If the BODY No. has not been registered, register the serial number according to
"registration of the serial number of the host machine" in "After replacing main controller
PCBs".
6-13
6-13