Canon MF8580Cdw Service Manual page 274

4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
11) Place a sheet of paper [1] over the hole [A], and remove the Link Shaft Stopper [2].
• 2 Claws [3]
NOTE:
The reason a sheet of paper [1] is placed over the hole [A] is to prevent the Link Shaft
Stopper [2] from falling in the machine.
[A]
[1]
12) Remove the Link Shaft [1].
• 2 Bosses [2]
[2]
[1]
4 Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
x2
[3]
[2]
F-4-462
F-4-463
CAUTION:
When installing the Link Shaft, be sure to fit the boss [1] of the Link Shaft to the groove [2]
of the arm of the Main Drive Unit.
[2]
4-204
[1]
F-4-464
4-204