Canon MF8580Cdw Service Manual page 277

4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
22) Release the 2 hooks [1] of the Main Drive Unit from the claw [2] in the direction of the
arrow, and remove the Main Drive Unit [3].
• 7 Screws [4]
[2]
[1]
x7
[4]
[4]
4 Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
[1]
[2]
[3]
[4]
F-4-473
CAUTION:
At installation, check that the hook [2] of the gear [1] of the Sub Drive Unit is in the
correct position as shown in the figure below.
If not, rotate the gear [1] in the direction of the arrow to set the hook [2] in the correct
position.
[2]
[1]
4-207
[1]
[2]
F-4-474
4-207