Canon MF8580Cdw Service Manual page 259

4
Disassembly/Assembly > Controller System > Removing the Driver PCB > Procedure
6) Remove the Driver PCB [1].
• 1 Flat Cable [2]
• 7 Connectors [3]
• 2 Screws [4]
• 1 Claw [5]
• 1 Hook [6]
x8 [1]
[3]
x2
[6]
[4]
4 Disassembly/Assembly > Controller System > Removing the Driver PCB > Procedure
[2] [3]
[4]
[5]
F-4-420
CAUTION:
When installing the Harness Guide [1] shifted in step 5 to the plate of the host machine,
be sure to install it as shown in the figure below because the 2 hooks [2] are hidden
under the Main Controller Support Plate [3].
[3]
After moving the Harness Guide [1] in the direction of the arrow and hooking the 2
hooks [2] and the 2 hooks [3], insert the boss [4].
[3]
[4]
[1]
[2]
4-189
[2]
[1]
F-4-421
F-4-422
4-189