Removing The Mp Tray Pickup Roller; Removing The Mp Tray Separation Pad - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Pickup Feeder System > Removing the MP Tray Separation Pad > Procedure

Removing the MP Tray Pickup Roller

■ Procedure
CAUTION:
Do not touch the surface of the Multi-purpose Tray Pickup Roller.
1) Turn ON the power switch.
2) Execute the following items in Service mode.
COPIER > FUNCTION > VIFFNC > FD-R-CHG
3) The Multi-purpose Tray Pickup Roller rotates to the replacement position.
4) Remove the cassette.
5) Lower the Multi-purpose Tray [1].
6) Remove the Multi-purpose Tray Pickup Roller [2].
• 2 Claws [3]
• 2 Shafts [4]
[1]
7) After replacing the Multi-purpose Tray Pickup Roller, turn OFF and then ON the power, and
then return it to its original position from the replacement position.
4 Disassembly/Assembly > Pickup Feeder System > Removing the MP Tray Separation Pad > Procedure
x2
[3]
[2]
[4]
[3]
F-4-255

Removing the MP Tray Separation Pad

■ Procedure
CAUTION:
Do not touch the surface of the Multi-purpose Tray Separation Pad.
1) Put a Screwdriver into the gap [2] between the MP Tray Separation Pad [1] and the Pad
Holder.
[1]
2) Turn the Screwdriver in the direction of the arrow to remove the MP Tray Separation Pad [1].
• 4 claws [2]
x4 x4 [1]
4-117
[2]
F-4-256
[2]
F-4-257
4-117