Canon MF8580Cdw Service Manual page 103

4
Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Unit + Reader Unit > Procedure
6) Remove the 2 Flat Cables [1] and the Ferrite Core [2] on the right side of the machine.
• 1 Flat Cable Connector Lock [3]
• 3 Connectors [4]
• 1 Claw [5]
• 3 Harness Guides [6]
[2]
[6]
x5
[4]
x3
[4]
4 Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Unit + Reader Unit > Procedure
[6]
[5]
[1]
[3]
CAUTION:
Be sure to perform the following when connecting the Flat Cable [1] to the connector
with a lock [2].
Be sure to insert the Flat Cable [1] into the connector with a lock [2], and after checking
that both sides (edges) [A] of the Flat Cable [1] are fitted in the 2 grooves [B] of the
connector with a lock [2], lock the Flat Cable Connector Lock [3].
[1]
[A]
[B]
[2]
[1]
F-4-53
[A]
[B]
[2]
[1]
[A]
[B]
[2]
[3]
[1]
[A]
[B]
[2]
[3]
4-33
F-4-54
4-33