Canon MF8580Cdw Service Manual page 270

4
Disassembly/Assembly > Controller System > Removing the Control Panel LCD PCB and Control Panel Key PCB > Procedure
3) Remove the Control Panel Key PCB [1].
• 10 Screws [2] (Binding)
[2]
x10
4 Disassembly/Assembly > Controller System > Removing the Control Panel LCD PCB and Control Panel Key PCB > Procedure
[2] [2]
[1]
F-4-452
CAUTION:
Be sure to perform the following when connecting the LCD Flat Cable [1] to the
connector with a lock [2].
Be sure to insert the LCD Flat Cable [1] into the connector with a lock [2], and after
checking that both sides (edges) [A] of the LCD Flat Cable [1] are fitted in the 2 grooves
[B] of the connector with a lock [2], lock the Flat Cable Connector Lock [3].
[3]
[2]
[B]
[A]
[1]
[3]
[2]
[B]
[A]
[1]
4-200
[2]
[B]
[A]
[1]
[2]
[B]
[A]
[1]
F-4-453
4-200