Canon MF8580Cdw Service Manual page 254

4
Disassembly/Assembly > Controller System > Removing the Main Controller PCB > Procedure
■ Procedure
1) Remove the Main Controller PCB [1].
• 1 Flat Cable Connector Lock [2]
• 3 Flat Cables [3]
• 1 Flat Cables [4] (Fax model only)
• 4 Connectors [5]
• 2 Connectors [6] (Fax model only)
• 1 Connector [7] (ADF model only)
• 1 Connector [8] (MF8230Cn only)
• 6 Screws [9] (TP)
• 1 Screw [10] (Binding)
• 1 Hook [11]
[2]
[3]
[7]
[5]
x12
[5]
[3]
[6]
[4]
[5] [8] [5]
4 Disassembly/Assembly > Controller System > Removing the Main Controller PCB > Procedure
[11] [9]
x7
[1]
[9]
CAUTION:
Be sure to perform the following when connecting the Flat Cable [1] to the connector
with a lock [2].
Be sure to insert the Flat Cable [1] into the connector with a lock [2], and after checking
that both sides (edges) [A] of the Flat Cable [1] are fitted in the 2 grooves [B] of the
connector with a lock [2], lock the Flat Cable Connector Lock [3].
[1]
[A]
[B]
[2]
[1]
[A]
[B]
[2]
[10]
F-4-412
[1]
[A]
[B]
[2]
[3]
[1]
[A]
[B]
[2]
[3]
4-184
F-4-413
4-184